Synthesi 1500

TECHNICAL SPECIFICATIONS
Control panel with 11" colour Touch display
Rotary turntable Ø 1500 mm
Maximum load dimensions: 800 x 1200 mm
Maximum load weight: 2000 kg
Usable wrapping height (pallet included): 2,400 mm (ARM VERSION)
Usable wrapping height (pallet included): 2,450 mm (COLUMN VERSION)
Turntable profile height: 75 mm
Automatic load height detection by photocell
Gradual and adjustable start/stop of rotation via inverter
Adjustable carriage up/down speed via inverter
Emergency/safety stop located at the base of the film carriage
Mushroom-head emergency stop button in compliance with CE standards
Machine reset button in compliance with CE standards
Acoustic signal at cycle start and at the end of the cycle

CYCLES SELECTABLE FROM THE CONTROL PANEL
F01 - 01 - Standard cycle (up and down)
F01 - 02 - Half cycle (up only or down only)
F01 - 03 - Complete cycle with additional bottom wraps at the same height as the starting position
F01 - 04 - Fast cycle (with little or no overlap)

PARAMETERS ADJUSTABLE FROM THE CONTROL PANEL
6 wrapping programs created by the operator
All functions can be selected directly from the display
Rotation speed adjustable from 5 to 12 rpm
Carriage up/down speed independently adjustable from 1.3 to 5.4 m/min
Bottom pallet wraps: 1 to 10
Top pallet wraps: 1 to 10
Pallet height photocell reading delay
Film tension adjustable for each phase of the wrapping cycle (for FE-OPRS carriages)

ACTIVATABLE FUNCTIONS
Keypad lock
Ergonomic Comfort height for film reel replacement
Soft-start cycle
Wrapping height according to pallet height using a height sensor (photocell exclusion)

“FM” FILM CARRIAGE WITH MECHANICAL BRAKE
Mechanical brake on the idler roller with manual adjustment
Film reel Ø 250 mm with 76 mm internal diameter – h = 500 mm, maximum weight 20 kg

Alternatively, carriage with motorized pre-stretch system, type PRS (Power Roller Stretch), or type PS (Power Stretch).

Brochure-Synthesi Brochure-Synthesi-Arm